LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 764 (Engine Controls - Description & Operation (Except Diesel & Hybrid)) >> Powertrain Control Software >> Multiplexing Implementation

Multiplexing Implementation

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.

Currently Ford Motor Company uses 2 different types of communication language protocols to communicate with the powertrain control module (PCM). These protocols are standard corporate protocol (SCP) and controller area network (CAN). For the 2005 model year the following vehicles use the SCP protocol for PCM communication with the diagnostic tool:

For the 2005 model year the following vehicles use the CAN protocol for PCM communication with the diagnostic tool:

For additional information about the module communication network, refer to MODULE COMMUNICATIONS NETWORK .