Fuel Level Input
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Ford GT will use a piezoelectric sonar type fuel level sensor. The sensor is located in the tank and the sensor signal is provided as a communications network message by the instrument cluster to the PCM.
The fuel level input (FLI) is either a hard wire signal input to the PCM from the fuel pump (FP) module or a communications network message. Most vehicle applications use a potentiometer type FLI sensor connected to a float in the FP module to determine fuel level.