Transmission Range Sensor (Cougar)
WARNING: This page is about a different car, the 2002 Mercury Cougar and 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
As necessary, move the manual control lever to Neutral position for Transmission Range (TR) sensor adjustment.
- Disconnect the battery cables. Remove the battery. Place the vehicle in Neutral. Remove the battery tray. Disconnect the Transmission Range (TR) sensor (3) harness connector (1) and loosen bolts (2). See Fig 1 . Rotate the manual valve detent lever assembly to the Neutral position.
- Using the Transmission Range Sensor Alignment Tool (307-351), align the TR sensor. See Fig 2 . Tighten the TR sensor bolts to specification. See TORQUE SPECIFICATIONS .
- Remove the transmission range sensor alignment tool. Connect the TR sensor harness connector. Install the battery tray. Connect the battery cables. Check for correct operation with the parking brake engaged. The engine should start in Park or Neutral positions only. Back-up lights should be active in the Reverse position only.