Qt3 Perform Equipment Hookup
WARNING: This page is about a different car, the 2004 Ford Pickup Heritage. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer to DIAGNOSTIC METHODS - BI-FUEL CNG
for details of hookup procedures.
- Using the scan tool:
- Connect the scan tool to the data link connector (DLC).
Is the equipment hooked up properly?
| Yes | No |
|---|---|
| GO to Quick Test QT4 PERFORM DIAGNOSTIC TEST MODE . | REPAIR the fault(s) as necessary. GO to Quick Test QT3 PERFORM EQUIPMENT HOOKUP and REPEAT. |