LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 753 (Engine Controls - Powertrain DTC Charts & Descriptions - CNG, Flex-Fuel & Gasoline) >> Diagnostic Trouble Code (DTC) Charts >> P2133 - Accelerator Pedal Position Sensor Circuit 3 High Input

P2133 - Accelerator Pedal Position Sensor Circuit 3 High Input

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2004 Mercury Sable, 2004 Mercury Mountaineer, 2004 Mercury Monterey, 2004 Mercury Marauder, and 2004 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P2133 - ACCELERATOR PEDAL POSITION SENSOR CIRCUIT 3 HIGH INPUT

Description:  Accelerator Pedal Position sensor 3 is out of range high input.
Possible Causes: 
  • APP sensor is defective.
  • APP sensor assembly is binding.
  • APP sensor harness is shorted to power.
  • Damaged PCM.
Diagnostic Aids:  An (APP) sensor PID reading may indicate a fault if available.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to DK: Accelerator Pedal Position Sensor STEP 1