P2019 - Intake Manifold Runner Position Sensor/Switch Circuit (Bank 2)
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2004 Mercury Sable, 2004 Mercury Mountaineer, 2004 Mercury Monterey, 2004 Mercury Marauder, and 2004 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P2019 - INTAKE MANIFOLD RUNNER POSITION SENSOR/SWITCH CIRCUIT (BANK 2)
| Description: | The IMRC system is monitored for failure during continuous or KOEO self-test. Each DTC distinguishes the corresponding failed bank for IMRC actuator assemblies with dual monitor switches. The test fails when the signal on the monitor pin is outside an expected calibrated range. This DTC replaces P1517. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | - | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to HU: Intake Air Systems STEP 15 | ||