P1380 - Variable Camshaft Timing Solenoid A Circuit Malfunction (Bank 1)
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2004 Mercury Sable, 2004 Mercury Mountaineer, 2004 Mercury Monterey, 2004 Mercury Marauder, and 2004 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P1380 - VARIABLE CAMSHAFT TIMING SOLENOID A CIRCUIT MALFUNCTION (BANK 1)
| Description: | The comprehensive component monitor (CCM) monitors the VCT circuit to the PCM for high and low voltage. If the voltage falls below a calibrated limit a calibrated amount of time during testing, the test fails. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | DTC P1380 is a VCT circuit check. Testing should include wires, solenoid coil, and the PCM. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to HK: Variable Cam Timing (VCT) STEP 1 | ||