LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 753 (Engine Controls - Powertrain DTC Charts & Descriptions - CNG, Flex-Fuel & Gasoline) >> Diagnostic Trouble Code (DTC) Charts >> P1168 - Fuel Rail Pressure Sensor In Range But Low

P1168 - Fuel Rail Pressure Sensor In Range But Low

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2004 Mercury Sable, 2004 Mercury Mountaineer, 2004 Mercury Monterey, 2004 Mercury Marauder, and 2004 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P1168 - FUEL RAIL PRESSURE SENSOR IN RANGE BUT LOW

Description:  The comprehensive component monitor (CCM) checks the FRP for acceptable fuel pressure. The test fails when the fuel pressure falls below a calibrated value.
Possible Causes: 
  • Low fuel pressure.
  • Damaged FRP sensor.
  • Excessive resistance in the circuit.
  • Low or no fuel.
Diagnostic Aids: 
  • An FRP PID value below 551 kPa (80 psi) indicates a failure.
  • Low or no fuel.
  • An FRP PID value greater than 896 kPa (130 psi) indicates a failure.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All - - GO to HB: Natural Gas Fuel Delivery System STEP 12