P0704 - Clutch Pedal Position Switch Malfunction
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2004 Mercury Sable, 2004 Mercury Mountaineer, 2004 Mercury Monterey, 2004 Mercury Marauder, and 2004 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0704 - CLUTCH PEDAL POSITION SWITCH MALFUNCTION
| Description: | When the clutch pedal is applied the voltage goes to low. If the PCM does not see this change from high to low the DTC is set. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | When pressing the CPP switch the voltage should cycle from 5 volts down. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to TA: Clutch Pedal Position CPP2 Switch STEP 1 | - | GO to TA: Clutch Pedal Position CPP2 Switch STEP 1 |