LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 753 (Engine Controls - Powertrain DTC Charts & Descriptions - CNG, Flex-Fuel & Gasoline) >> Diagnostic Trouble Code (DTC) Charts >> P0606 - Powertrain Control Module Internal Communication Error

P0606 - Powertrain Control Module Internal Communication Error

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2004 Mercury Sable, 2004 Mercury Mountaineer, 2004 Mercury Monterey, 2004 Mercury Marauder, and 2004 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0606 - POWERTRAIN CONTROL MODULE INTERNAL COMMUNICATION ERROR

Description:  P0606 indicates a register readback (PCM internal communications) error.
Possible Causes: 
  • PCM damaged or defective.
Diagnostic Aids:  Internal PCM failure. Replace the PCM. For Electronic Throttle Control applications, an internal PCM failure, or an ETC system FMEM condition exists. Repairing the other DTCs can fix the P0606.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
Vehicles with electronic throttle control (ETC) DTC is an indication of a failure mode in the Electronic Throttle Control system, which includes the APPS, ETB, and PCM. It is accompanied by other DTCs which provide repair direction. Proceed to DIAGNOSTIC TROUBLE CODE (DTC) DESCRIPTION  table to repair those DTCs, and the P0606 will not be reset. DTC is an indication of a failure mode in the Electronic Throttle Control system, which includes the APPS, ETB, and PCM. It is accompanied by other DTCs which provide repair direction. Proceed to DIAGNOSTIC TROUBLE CODE (DTC) DESCRIPTION  table to repair those DTCs, and the P0606 will not be reset. DTC is an indication of a failure mode in the Electronic Throttle Control system, which includes the APPS, ETB, and PCM. It is accompanied by other DTCs which provide repair direction. Proceed to DIAGNOSTIC TROUBLE CODE (DTC) DESCRIPTION  table to repair those DTCs, and the P0606 will not be reset.
All Others Be sure to check for aftermarket performance products before replacing the PCM. If replacement is necessary, refer to DIAGNOSTIC METHODS - CNG, FLEXFUEL & GASOLINE Be sure to check for aftermarket performance products before replacing the PCM. If replacement is necessary, refer to DIAGNOSTIC METHODS - CNG, FLEXFUEL & GASOLINE Be sure to check for aftermarket performance products before replacing the PCM. If replacement is necessary, refer to DIAGNOSTIC METHODS - CNG, FLEXFUEL & GASOLINE