P0223: Throttle Position (TP2) Sensor Circuit High Input
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2004 Mercury Sable, 2004 Mercury Mountaineer, 2004 Mercury Monterey, 2004 Mercury Marauder, and 2004 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0223 - THROTTLE POSITION (TP2) SENSOR CIRCUIT HIGH INPUT
| Description: | The ETC TP2 sensor was flagged as fault status by the PCM indicating a high voltage. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The fault exhibits a symptom of limited power. A TP2 PID (TP V PID) reading greater than 93% (4.65 volts) in key ON engine OFF, continuous memory or key ON engine running indicates a hard fault. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DV: THROTTLE BODY ASSEMBLY ETC Step 1. | ||