LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 749 (Automatic Transmission - 4R100) >> In-Vehicle Repair >> Heat Shield - Vehicles Equipped With 7.3L Engine >> Installation

Heat Shield - Vehicles Equipped With 7.3L Engine: Installation

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the heat shield.
    Fig 1: Installing Heat Shield
    G01538943Courtesy of FORD MOTOR CO.
  2. Remove the supports and lower the vehicle.