Torque Converter Flushing
WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL
- Following the instructions included with a suitable torque converter/transmission fluid cooler cleaner, flush the torque converter.
- After flushing, drain the remainder of the solvent through the converter drain plug.
- Add 1.9 liter (2 qt.) of clean automatic transmission fluid into the converter fluid filler tube and agitate by hand.
- Thoroughly drain the solution.
CAUTION:
Mineral spirits used to clean the torque converter must be fresh, non-chlorinated and non-halogenated.