Rotunda Transmission Tester
WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
The Transmission Tester is used to diagnose the electronically controlled transmission and is used in conjunction with the pinpoint tests. The tests should be carried out in order. Installing the Transmission Tester allows separation of the vehicle electronics from transmission electronics, refer to the Transmission Tester manual for these tests and instructions.
- Bench Testing-Engine Off
- Resistance/Continuity Test
- Solenoid Voltage Test
- Dynamic Testing-Engine On
- EPC Solenoid
- Transmission Engagements
- Upshifts/Downshifts
- Torque Converter Clutch (TCC) Engagement
- Coast Clutch
- Digital Transmission Range (TR) Sensor Testing
- Resistance/Continuity Test
- Sensor Tests
- Switch Test-PARK/NEUTRAL, Backup Lamp and Optional Circuits