LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 746 (Engine Controls - Diagnostic Subroutines - 6.0L Diesel (99P E-Series & 99P F450/550)) >> Hard Start/No Start Diagnostic Procedures >> 1. Visual Engine/Chassis Inspection >> Recommended Procedure:

Recommended Procedure:

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2004 Ford RV Cutaway, 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, and 2004 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the fuel system including the fuel tank and the fuel lines for kinks, bends and/or leakage. Inspect for coolant leaks at the radiator and the heater hoses and check the coolant level. Inspect the manifold absolute pressure (MAP) sensor and the intercooler for pinched hoses and leaks. Inspect wiring for correct routing and make sure no rubbing or chafing has occurred. Inspect the engine harness, fuel injector control module (FICM), powertrain control module (PCM) and sensor connectors to make sure they are completely seated and in good condition.