LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 743 (Engine Controls - Theory & Operation - 6.0L Diesel (99P E-Series & 99P F450/550)) >> Diesel PCM Inputs >> Exhaust Pressure Sensor

Exhaust Pressure Sensor

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2004 Ford RV Cutaway, 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, and 2004 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.

The exhaust pressure (EP) sensor is a variable capacitor sensor that is supplied a 5-volt reference signal by the PCM and returns a linear analog voltage signal that indicates pressure. The EP sensor measures the pressure in the LH exhaust manifold. The sensor feedback signal is used for variable geometry turbo (VGT) and exhaust gas recirculation (EGR) valve control.

An open or short in the EP sensor wiring will result in an out-of-range low voltage at the PCM.

Fig 1: Identifying Exhaust Pressure Sensor
G03467725Courtesy of FORD MOTOR CO.