LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Automatic Transmission Servicing) >> Removal & Installation >> Output Shaft Speed Sensor >> Installation

Output Shaft Speed Sensor: Installation

WARNING: This page is about a different car, the 2002 Ford Ranger, 2002 Ford Explorer Sport Trac, and 2002 Ford Explorer Sport. However, it is still accessible from the selected car via links, so may be relevant.

Inspect and lubricate O-ring with petroleum jelly. Install the OSS sensor into the transmission. Tighten OSS sensor screw. Connect OSS sensor harness connector. Lower the vehicle.

scientia non olet · About LEMON Manuals