LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 732 (Four Wheel Drive Systems) >> Disassembly And Assembly >> Transfer Case - Electronic Shift >> Item 45: Output Shaft Bushing Disassembly Note

Item 45: Output Shaft Bushing Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a drift and a hammer, remove the output shaft bushing, if necessary.
    Fig 1: Removing Output Shaft Bushing
    G03182470Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals