LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 732 (Four Wheel Drive Systems) >> Disassembly And Assembly >> Transfer Case - Electronic Shift >> Item 13: Front Output Shaft Rear Bearing Disassembly Note

Item 13: Front Output Shaft Rear Bearing Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tools, remove the front output shaft rear bearing.
    Fig 1: Removing Front Output Shaft Rear Bearing
    G03182456Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals