LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 732 (Four Wheel Drive Systems) >> Disassembly And Assembly >> Transfer Case - Electronic Shift >> Item 12: Cover Assembly Note

Item 12: Cover Assembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Applying too much silicone gasket and sealant can plug the fluid filter and cause transfer case failure.
    NOTE: Make sure the transfer case mating surfaces are clean.
  1. Apply a 3-mm (1/8-inch) bead of sealant to the transfer case mating surfaces.
  2. Position the transfer case halves together.
scientia non olet · About LEMON Manuals