SS1, SS2, CCS & TCC Solenoids (Bench Mode)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2002 Lincoln Navigator, 2002 Ford Expedition, 2001 Lincoln Navigator, 2001 Ford RV Cutaway, and 2001 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

This procedure ensures TCC and shift solenoids may be turned on or off. Ensure parking brake is set, gearshift lever is in "P" position, with ignition switch in ON position (engine off). Follow the procedure in order to test appropriate solenoid.

Select OUTPUT STATE CONTROL.
Select TRANS-BENCH MODE.
Select PIDs to be monitored (SS1, SS2, CCS or TCC).
Monitor all selected PIDs during test.
Select Parameters - SS1, SS2, CCS or TCC.
Select ON, then press SEND to turn solenoid on.
Select OFF, then press SEND to turn solenoid off.
Select "XXX", then press SEND at any time to cancel any command sent.