LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 729 (Engine - 6.0L Diesel - F250-F550 Super Duty) >> General Procedures >> Cylinder Bore Honing >> Inspection

Cylinder Bore Honing: Inspection

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: There is no authorized repair for cracks in the cylinder block. If cracks are present, install a new cylinder block.
    NOTE: Do not substitute rubbing alcohol for wood alcohol.
  1. Inspect the cylinder block for cracks not visible to the eye.
    1. Coat the suspected area with a mixture of 25 percent kerosene and 75 percent light engine oil.
    2. Wipe the area dry, and immediately apply a coating of zinc oxide dissolved in wood alcohol. If cracks are present, the coating will become discolored at the damaged area.
scientia non olet · About LEMON Manuals