Torque Specifications Chart
WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS CHART
| Description | N.m | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Center support fluid feed bolts | 33 | 24 | - | ||
| Front support-to-fluid pump | 29 | 21 | - | ||
| Coast clutch hub-to-overdrive carrier | 25 (1) | 18 (1) | - | ||
| Cooler line fitting-to-case | 48 | 35 | - | ||
| Extension housing fill plug | 20 | 15 | - | ||
| Extension housing-to-case | 47 | 35 | - | ||
| Parking rod guide plate-to-case | 25 | 18 | - | ||
| Line pressure plug-to-case | 12 | 9 | - | ||
| Solenoid body-to-case | 10 | - | 89 | ||
| Fluid pan drain plug | 18 | 13 | - | ||
| Transmission pan-to-case | 15 | 11 | - | ||
| Output shaft retaining nut | 200 | 148 | - | ||
| Parking pawl abutment-to-case | 25 | 18 | - | ||
| Pump body-to-case | 27 | 20 | - | ||
| Power take off plate-to-case | 41 | 30 | - | ||
| Solenoid body and ditch plate-to-case | 10 | - | 89 | ||
| Transmission range sensor-to-case | 10 | - | 89 | ||
| Output shaft speed (OSS) sensor | 9 | - | 80 | ||
| Turbine shaft speed (TSS) and intermediate shaft speed sensor | 9 | - | 80 | ||
| Transmission fluid cooler tube nut (case) | 40 | 30 | - | ||
| Transmission flexplate cover | 35 | 26 | - | ||
| Torque converter-to-flexplate nut | 35 | 26 | - | ||
| Output shaft flange bolt | 150 | 110 | - | ||
| Shift cable bracket | 25 | 18 | - | ||
| Remote fluid filter to case bracket | 25 | 18 | - | ||
| Oil filter housing to bracket | 25 | 18 | - | ||
| Transmission to engine | 47 | 35 | - | ||
| Fill tube to engine | 10 | - | 89 | ||
| Transmission rear mount | 94 | 69 | - | ||
| Transmission support crossmember to frame | 81 | 60 | - | ||
|
|||||