LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 727 (Automatic Transmission - 5R110W) >> In-Vehicle Repair >> Extension Housing Seal >> Removal

Extension Housing Seal: Removal

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

    ALL VEHICLES 

  1. Remove the driveshaft. For additional information, refer to DRIVESHAFT .

    2. VEHICLES WITH A FIXED FLANGE 

  2. Remove the output shaft flange.
    1. Remove and discard the output shaft flange bolt.
    2. Remove the output shaft flange.
      Fig 1: Removing Output Shaft Flange
      G03380990Courtesy of FORD MOTOR CO.
  3. Using the special tool, remove and discard output shaft nut.
    Fig 2: Removing Output Shaft Nut Using Special Tool
    G03380991Courtesy of FORD MOTOR CO.
  4. Using the special tools, remove the output shaft seal.
    Fig 3: Removing Output Shaft Seal Using Special Tools
    G03380992Courtesy of FORD MOTOR CO.

    5. VEHICLES WITHOUT A FIXED FLANGE 

  5. Using the special tools, remove the output shaft seal.
    Fig 4: Removing Output Shaft Seal Using Special Tools
    G03380993Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals