LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 727 (Automatic Transmission - 5R110W) >> Diagnosis & Testing >> Output State Control (OSC) Mode >> Procedure

Output State Control (OSC) Mode: Procedure

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The OSC has 2 modes of operation for the transmission:

In order to operate the OSC in the drive mode, no diagnostic trouble codes (DTCs) related to the transmission range (TR) sensor, turbine shaft speed (TSS) sensor, output shaft speed (OSS) sensor or the SSPC-A (coast clutch), SSPC-B (overdrive clutch), SSPC-C (intermediate clutch), SSPC-D (direct clutch), SSPC-E (low reverse) and PC-A (line pressure) solenoids may be present. Carry out the KOEO on-demand self test and retrieve continuous codes to identify any codes that are present.

scientia non olet · About LEMON Manuals