LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 727 (Automatic Transmission - 5R110W) >> Description & Operation >> GEARTRAIN >> Output Shaft

Output Shaft

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

The output shaft is supported by a press fit radial bearing in the extension housing. It is positioned by a bushing in the forward clutch cylinder, which in turn is positioned by the case center support and the center shaft.

scientia non olet · About LEMON Manuals