LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Diagnosis) >> Description & Operation >> Electronic Control System >> Retrieving DTCs

Retrieving DTCs

WARNING: This page is about a different car, the 2001 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.

DTCs are retrieved from EEC-V system through 16-pin Data Link Connector (DLC) using appropriate scan tool. DLC is located below instrument panel, to right of steering column. Self-diagnostic test procedures are written for use with New Generation Star (NGS) tester. If an aftermarket scan tool is used, ensure scan tool is OBD-II certified. Refer to scan tool manufacturer's operating procedures. Once DTCs are recorded, diagnostic tests are used to locate and repair problem. See DIAGNOSTIC TESTS  .