LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 719 (Exterior Lighting) >> Diagnosis And Testing >> Stoplamps >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the stoplamps to duplicate the original condition.
  2. Inspect to determine if one of the following electrical concerns apply:
    VISUAL INSPECTION CHART

    Electrical 
    • Circuitry
    • Fuse junction panel Fuse 7 (10A) and Fuse 11 (15A)
    • Damaged multi-function switch
    • Damaged brake pedal position (BPP) switch
    • Damaged connectors
  3. If the concern(s) remains after the inspection, determine the symptom(s) and proceed to Symptom Chart.