LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 716 (Fuel System-General Information-Gasoline & Diesel) >> General Procedures >> Vapor Tube Fittings >> Connect

Vapor Tube Fittings: Connect

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the fitting and the tube for damage.
  2. Remove any dirt or obstructions.
  3. Push the tube into the fitting until it snaps in place.
    Fig 1: Pushing Tube Into The Fitting Until It Snaps In Place
    G03462089Courtesy of FORD MOTOR CO.
  4. Pull on the connection to make sure the fitting is secure.
    Fig 2: Pulling On Connection To Make Sure Fitting
    G03462090Courtesy of FORD MOTOR CO.