LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 716 (Fuel System-General Information-Gasoline & Diesel) >> General Procedures >> Push Connect Fittings >> Connect

Push Connect Fittings: Connect

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Lubricate the tube end with clean engine oil meeting Ford specification WSS-M2C153-F to ease assembly.
    Fig 1: Aligning And Pushing Tube Into Fitting
    G03462072Courtesy of FORD MOTOR CO.
  1. Align and push the tube into the fitting until you hear a click.
  2. Pull on the fitting to make sure it is fully engaged, then install safety clip.
    Fig 2: Installing Safety Clip
    G03462073Courtesy of FORD MOTOR CO.