Hairpin Clip Fitting: Connect

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the fitting and the tube for damage. Remove any dirt or obstructions.
Apply a light coat of clean engine oil to the male tube end.
Insert the hairpin clip into the fitting.

Fig 1: Insert The Hairpin Clip Into Fitting
Courtesy of FORD MOTOR CO.
Align the tube and the fitting.

Fig 2: Aligning Tube And Fitting
Courtesy of FORD MOTOR CO.
Insert the tube in the fitting and push together until a click is heard.

Fig 3: Inserting Tube In Fitting And Push Together Until Click Is Heard
Courtesy of FORD MOTOR CO.
Pull on the connection to make sure it is fully engaged.

Fig 4: Pulling On Connection To Ensure It Is Fully Engaged
Courtesy of FORD MOTOR CO.