LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 715 (Engine System - General Information) >> General Procedures >> Exhaust Manifold - Inspection >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Special Service Tool
G03462054Courtesy of FORD MOTOR CO.
  1. Place a straight edge across the exhaust manifold flanges and check for warping with a feeler gauge.
    Fig 2: Checking For Exhaust Manifold Flanges for Warpage
    G03462055Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals