LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 715 (Engine System - General Information) >> General Procedures >> Crankshaft Main Bearing Journal - Diameter

Crankshaft Main Bearing Journal - Diameter

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure each of the crankshaft main bearing journal diameters in at least two directions.
    • If out of specification, install new components as necessary. Refer to IN-VEHICLE REPAIR in the appropriate ENGINE article for the procedure.
    Fig 1: Measuring Each Of Crankshaft Main Bearing Journal Diameters In At Least Two Directions
    G03461988Courtesy of FORD MOTOR CO.