Crankshaft - Connecting Rod Journal Taper, Out of Round
WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the crankshaft connecting rod journal diameters in two directions perpendicular to one another at each end of the connecting rod journal. The difference in the measurements from one end to the other is the taper. Verify measurement is within the wear limit.
- Refer to SPECIFICATIONS in the appropriate ENGINE article.
- If out of specification, install new components as necessary. Refer to IN-VEHICLE REPAIR in the appropriate ENGINE article for the procedure.