LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Engine Control System & Engine Component Tests - EEC-V - Diesel 7.3L (99F E Series & 99F F450/550)) >> Engine Performance Diagnostic Procedures >> Test 9: Perform KOER On-Demand Self-Test >> Purpose

Test 9: Perform KOER On-Demand Self-Test: Purpose

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Ford RV Cutaway, 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, and 2002 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.

This test is performed to determine if PCM has detected any fault conditions that would cause a performance problem while engine is running. PCM will perform step tests on injection control pressure system and exhaust back pressure system. Step tests are PCM-controlled tests where PCM commands a specific exhaust back pressure or injection control pressure and then measures result. If a predetermined threshold is not reached, a DTC will be generated. This test can be performed at any engine temperature.