LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 709 (Safety Belt System - Excursion & F250-F550 Super Duty) >> Removal And Installation >> Safety Belt Buckle - Second Row, 60/40, Center, Excursion >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the second row 40 percent seat forward.
  2. Remove the safety belt buckle.
    1. Using the special tool 501-010 (T77L-2100-A), remove the bolt.
    2. Remove the safety belt buckle.
      Fig 1: Removing Safety Belt Buckle
      G02774749Courtesy of FORD MOTOR CO.
    3. NOTE: Make sure to tighten the bolts to specification.
  3. To install, reverse the removal procedure.
    • See the removal procedure or Specifications for torque specifications.
  4. Check the restraint system for correct operation.
scientia non olet · About LEMON Manuals