LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 709 (Safety Belt System - Excursion & F250-F550 Super Duty) >> Removal And Installation >> Safety Belt Buckle - Front, Bench Seat >> Removal

Safety Belt Buckle - Front, Bench Seat: Removal

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the utility tray, if necessary.
  2. Remove the safety belt buckle bolts.
    1. Use the T-55 Torx bit to remove the LH safety belt buckle bolt.
    2. Disconnect the safety belt warning indicator switch connector.
    3. Use the T-55 Torx bit to remove the RH safety belt buckle bolt.
      Fig 1: Removing RH Safety Belt Buckle Bolt
      G02774731Courtesy of FORD MOTOR CO.
  3. Remove the safety belt buckles.
    1. Remove the LH safety belt buckle.
    2. Remove the RH safety belt buckle.
      Fig 2: Removing RH Safety Belt Buckle
      G02774732Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals