LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 708 (Handles, Locks, Latches & Entry Systems -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Door Lock Control Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The left front door with power windows and power mirror is shown. The other doors and vehicles without power windows or power mirrors are similar.
    Fig 1: Removing Door Command Center To Gain Access To Electrical Connectors
    G02774494Courtesy of FORD MOTOR CO.
  1. Remove the door command center enough to gain access to the electrical connectors.
  2. Disconnect the electrical connectors.
    Fig 2: Disconnecting Electrical Connectors
    G02774495Courtesy of FORD MOTOR CO.
  3. Remove the door command center.
  4. Release the front and back retaining clips on the door lock control switch and remove the switch.
    Fig 3: Removing Door Lock Control Switch
    G02774496Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals