LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 708 (Handles, Locks, Latches & Entry Systems -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Door Latch - Glove Compartment >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the glove compartment.
  2. Release the stops and tilt the glove compartment to the full open position.
    Fig 1: Opening Glove Compartment To Full Position
    G02774414Courtesy of FORD MOTOR CO.
  3. Remove the eight screws and the glove compartment bin.
    Fig 2: Removing Glove Compartment Bin Screws
    G02774415Courtesy of FORD MOTOR CO.
  4. Remove the glove compartment latch.
    1. Remove the screws.
    2. Remove the latch.
      Fig 3: Removing Glove Compartment Latch
      G02774416Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals