LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 708 (Handles, Locks, Latches & Entry Systems -- Excursion & F250-F550 Super Duty) >> General Procedure >> Keyless Entry Keypad Code Programming >> Wireless Keyless Entry Keypad Remastering (F-Super Duty vehicles built before 12/03 only)

Wireless Keyless Entry Keypad Remastering (F-Super Duty vehicles built before 12/03 only)

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Remastering can only be carried out once.
  1. Enter the new master keycode into the new wireless keyless entry keypad.
  2. Press and hold the 9/0 button for 2 seconds.
  3. While holding the 9/0 button, press and hold the 5/6 button until the light on the unit flashes twice.
  4. NOTE: If a mistake is made before the fifth number of the master keycode is entered, wait for 10 seconds and repeat Step  2.
  5. Enter the old master keycode into the new wireless keyless entry keypad.
  6. The door locks will cycle from unlock to lock then unlock to confirm that the master keycode has been changed.
  7. Confirm that the master keycode has been changed in the new wireless keyless entry keypad by unlocking the vehicle with the master keycode.