LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 708 (Handles, Locks, Latches & Entry Systems -- Excursion & F250-F550 Super Duty) >> Diagnosis And Testing >> Locks, Latches and Entry Systems - Module Controlled >> Principles of Operation >> Autolock Enable/Disable - Using the Hardwired Keyless Entry Keypad

Autolock Enable/Disable - Using the Hardwired Keyless Entry Keypad

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

A manual enable/disable mode allows the autolock feature to be turned off and on.

To enable or disable autolock using the hardwired keyless entry keypad:

  1. Enter the 5-digit permanent entry code into the keyless entry keypad.
  2. Within 5 seconds of entering the code, press and hold the 7/8 button on the keypad.
  3. Within 5 seconds of Step 2, and while holding the 7/8 button, press the 3/4 button on the keypad and release it.
  4. Within 5 seconds of Step 3, release the 7/8 button on the keypad.

If the autolock feature is disabled, the horn will chirp once. If the autolock feature is enabled, the horn will chirp once shortly and then sound a second time for a longer sound of the horn once the above sequence is completed.

scientia non olet · About LEMON Manuals