LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 707 (Instrument Panel & Console -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Instrument Panel - Cluster Finish Panel >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the audio unit. Refer to AUDIO UNIT .
  2. Remove the instrument panel cluster finish panel.
    1. Loosen the screws.
    2. Remove the instrument panel cluster finish panel.
      • Disconnect the electrical connectors.
        Fig 1: Disconnecting Electrical Connectors
        G02774323Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
    Fig 2: Installing Electrical Connectors
    G02774324Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals