LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 705 (Seat System -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Seat Latch - Seat Cushion Release, Excursion, Second Row, 60 Percent >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disassemble the seat cushion. Refer to REAR SEAT CUSHION - EXCURSION, SECOND ROW, 60 PERCENT .
  2. Remove the bolt.
    Fig 1: Removing Bolt
    G02773978Courtesy of FORD MOTOR CO.
  3. Remove the nut.
    Fig 2: Removing Nut
    G02773979Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals