Removal and Installation
WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- From the bottom of the seat backrest, push the seat backrest upward, then pull the bottom outward and remove from vehicle.
- To install, reverse the removal procedure.
- Check the active restraint system for correct operation. Refer to SAFETY BELT SYSTEM .
NOTE:
Make sure all seat backrest hooks are in place.