LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 705 (Seat System -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Rear Seat Backrest - Bench, Crew Cab >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat. Refer to REAR SEAT - BENCH, CREW CAB .
  2. Separate the seat cover J-clip.
    Fig 1: Separating Seat Cover J-Clip
    G02773873Courtesy of FORD MOTOR CO.
  3. Pull the seat covering to access the seat back retaining bolts.
    Fig 2: Pulling Seat Covering To Access Seat Back Retaining Bolts
    G02773874Courtesy of FORD MOTOR CO.
  4. Remove the seat back bolts.
    Fig 3: Removing Seat Back Bolts
    G02773875Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals