LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 705 (Seat System -- Excursion & F250-F550 Super Duty) >> Disassembly And Assembly >> Rear Seat Cushion - SuperCab >> Disassembly and Assembly

Disassembly and Assembly

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The 60 percent seat is shown. The 40 percent seat is similar.
  1. Remove the seat. Refer to REAR SEAT - SUPERCAB .
  2. Remove the latch. Refer to SEAT LATCH - SUPERCAB, REAR .
  3. Unclip the J-clip.
    Fig 1: Uncliping J-Clip
    G02774070Courtesy of FORD MOTOR CO.
  4. Remove the upholstery.
    Fig 2: Removing Upholstery
    G02774071Courtesy of FORD MOTOR CO.
  5. Remove the seat cushion foam pad from the frame.
  6. To assemble, reverse the disassembly procedure.
scientia non olet · About LEMON Manuals