LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 705 (Seat System -- Excursion & F250-F550 Super Duty) >> Disassembly And Assembly >> Rear Seat Cushion - Crew Cab, Quad Bucket >> Disassembly and Assembly

Disassembly and Assembly

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat quad bucket backrest. Refer to REAR SEAT BACKREST - CREW CAB, QUAD BUCKET .
  2. Release the J-clips.
    Fig 1: Releasing J-Clips
    G02774031Courtesy of FORD MOTOR CO.
  3. Remove the two pin-type retainers.
    Fig 2: Removing Pin-Type Retainers
    G02774032Courtesy of FORD MOTOR CO.
  4. Remove the seat cushion pan from the cushion trim cover and foam pad assembly.
    Fig 3: Removing Seat Cushion Pan From Cushion Trim Cover
    G02774033Courtesy of FORD MOTOR CO.
  5. Invert the seat cushion trim cover and remove all the hog rings and remove the trim cover from the cushion foam pad.
    Fig 4: Removing Trim Cover From Cushion Foam Pad
    G02774034Courtesy of FORD MOTOR CO.
  6. To assemble, reverse the disassembly procedure.
scientia non olet · About LEMON Manuals