LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 705 (Seat System -- Excursion & F250-F550 Super Duty) >> Disassembly And Assembly >> Front Seat Cushion - 20 Percent >> Assembly

Front Seat Cushion - 20 Percent: Assembly

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles 

  1. Position the seat cushion foam pad on the pan. Fasten the J-clips.
    Fig 1: Positioning Seat Cushion Foam Pad On Pan
    G02773994Courtesy of FORD MOTOR CO.
  2. NOTE: LH shown, RH similar.
    Fig 2: Installing RH And LH Seat Riser Retaining Bolts
    G02773995Courtesy of FORD MOTOR CO.
  3. Install the RH and LH seat riser retaining bolts.
  4. Install the LH seat back bracket bolts.
    Fig 3: Installing LH Seat Back Bracket Bolts
    G02773996Courtesy of FORD MOTOR CO.
  5. Install the seat latch. Refer to SEAT LATCH - 20 PERCENT .
  6. Install the seat backrest. Refer to FRONT SEAT BACKREST - 20 PERCENT .
  7. Install the front seat. Refer to FRONT SEAT - 20 PERCENT .
  8. Install the front seats. Refer to FRONT SEAT - WITH SEAT INTEGRATED RESTRAINTS (SIR)  or FRONT SEAT - CAPTAIN'S CHAIR AND 40 PERCENT .

    Vehicles with SIR 

  9. Repower the SRS. Refer to AIR BAG RESTRAINT SYSTEMS .