LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 703 (Interior Trim & Ornamentation -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Trim Panel - Back Panel Trim Cover, Crew Cab >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the child safety seat tether anchor. Refer to SAFETY BELT SYSTEM .
  2. Remove the left and right rear corner trim panels. Refer to TRIM PANEL - REAR CORNER, CREW CAB .
  3. Remove the four pin-type retainers.
    Fig 1: Removing Pin-Type Retainers
    G02773609Courtesy of FORD MOTOR CO.
  4. Remove the back panel trim cover.
  5. To install, reverse the removal procedure.