Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Right side shown, left side similar.

Remove the right front inside assist handle covers.

Fig 1: Removing Right Front Inside Assist Handle Covers
Courtesy of FORD MOTOR CO.
Remove the bolts.

Fig 2: Removing Bolts
Courtesy of FORD MOTOR CO.
Remove the right front inside assist handle.

NOTE: Carefully rotate the moulding during this step.

Fig 3: Removing Right Front Inside Assist Handle

Courtesy of FORD MOTOR CO.

Pry the windshield side garnish moulding (03598) to remove.
To install, reverse the removal procedure.